If you're planning a shower without tile, you'll run into two names: tadelakt and microcement. Both give you walls with no grout lines, and both can go in a shower. We suggest tadelakt for shower walls when you want a soft, stone-like surface and are willing to look after it. We suggest microcement when the same finish has to cover the floor or take heavy daily use.

Tadelakt Microcement
What it is Polished lime plaster Thin cement and resin coating, about 3 mm
Look Soft and silky, with slight variation in color Flat and even, like smooth concrete
Sheen Matte, satin or glossy Matte to satin
Where we use it Shower walls, bathroom walls, feature walls Walls, floors, countertops, wet rooms
Shower floor We don't recommend it Yes
Starting price From $20 per sq ft From $25 per sq ft

What each finish is

Tadelakt is a lime plaster that comes from Morocco, where builders used it in bathhouses and water cisterns. A plasterer applies it by hand, compresses it and polishes it as it cures. Traditionally the surface is then rubbed with olive oil soap, which reacts with the lime and makes the wall repel water. We finish ours with a modern protective sealer.

Microcement is a mix of cement, fine aggregate, pigment and polymer resin. We trowel it on in thin layers until the coating is about 3 mm thick, then seal it. Because the coating is so thin, we can often apply it over existing tile or concrete without demolition.

Bathroom with microcement walls and floor
Microcement wall behind a double vanity

How each one handles water

With both finishes, the surface you see is the top of a system. How well a shower resists water depends on the preparation underneath and the sealer on top.

A tadelakt wall sheds water well. The weak points are places where water sits, such as a flat ledge, the bottom of a niche or a bench. Those surfaces should be sloped so water runs off.

Microcement gets its water resistance from the resin in the mix and from the sealer. With the right build-up we can make it fully waterproof, which is why people choose it for wet rooms where the floor and walls are one continuous surface.

Cracks usually start in the building. If the wall or subfloor moves, either finish will crack with it, so the condition of the surface underneath matters more than which product you pick.

How they look and feel

Tadelakt looks like polished stone that someone made by hand. The color varies slightly across the wall, the surface catches light, and it feels silky when you touch it. You can have it matte, satin or glossy. At the Róhe flagship at 77 Mercer Street in SoHo, we applied it matte across the store's walls.

Microcement is flatter and more even, closer to smooth concrete. It suits a minimal bathroom where the walls, floor and vanity are all one material. The sheen runs from matte to satin.

Close view of a matte microcement bathroom wall
Microcement surface in a light plaster tone

Floors, benches and niches

If you want the shower floor in the same finish as the walls, choose microcement. People walk on it in busy commercial spaces, and it copes with the grit and standing water a shower floor gets.

We recommend tadelakt for walls and architectural details, and we don't recommend it for floors. You can also combine the two, with tadelakt on the walls and microcement or stone underfoot.

Care and repair

Clean either finish with a mild, pH-neutral soap and a soft cloth. Acidic cleaners, bleach and abrasive pads damage the sealer, and on tadelakt they can damage the lime too.

Tadelakt needs more attention from you. If your water is hard, wipe or squeegee the walls after a shower, and expect to have the sealer renewed over the years.

Microcement is harder to scratch and easier to live with day to day. The sealer wears first in the spots that get the most use, and we can recoat it.

Repairs are the drawback of both. A patch rarely disappears completely, so fixing damage usually means refinishing the whole wall.

What each one costs

Our tadelakt starts at $20 per square foot and our microcement at $25 per square foot. The final price depends on the condition of the surface underneath, the number of corners, niches and edges, and the size of the job. A small shower with a lot of detail can cost more per square foot than a large plain wall.

How to choose

Choose tadelakt if the walls are the feature of the room, you like a surface with some variation, and you're comfortable caring for it. Choose microcement if you want one material across the walls and floor, or if you're covering existing tile.

If you're in New York or the Tri-State area and still undecided, send us photos of the bathroom and tell us how you use it. We answer inquiries within one business day.